Analynk CTX-401 Hazardous Area Explosion Proof Antennas

The CTX-401 antennas are designed for use in “Hazardous-Classified” and IndustrialHardened applications. The antennas are omni-directional with 0 dBi gain and designed for flexible mounting on a variety of explosion proof housings. The mounting base is made of heavy nickel-plated brass and includes a Class I, Division 1 seal and may be ordered with a 3/4” NPT thread or M20 thread. An integrated TNC connector is used for the RF connection. The radome is optimized for rugged industrial applications while maintaining maximum radio frequency transmission and reception efficiency. The antenna may be mounted up to 18” away from the enclosure within a hazardous location without an additional seal. A ground plane will increase performance of this antenna.

Specs:

• M20 or 3/4" thread
• Frequency 450MHz-470MHz
• Integral flame barrier - no seal required
• 0 dBi gain
• 2 Watt output max.
• Class I, Div. 1, Groups C & D, UL Listed
• Class I, Zone 1 UL Listed
• ATEX Zone 1 Certified
• IECEx Certified
• 7 Joule impact rating
• Industrial Temperature range: -40C to 85C
• Patented Design
• RoHS Compliant

Applications:

• Hazardous tank level monitoring
• Offshore platforms
• Chemical processing
• Power plants
• Utility systems where explosive gases, liquids, or dusts may be present
• Wireless bridges
• Hazardous area computers
• Patented design

Download the CTX-401 Specification Sheet